Posted on

Brioche Knitting Mistakes Can Be Fixed!

use a crochet hook to pick up dropped brioche stitches

I made a video that shows how to fix brioche! It’s up on my YouTube channel, and you can find it here.

Fixing a dropped stitch in brioche is just like fixing a dropped stitch in stockinette, but there are yarnover buddies in the way. The trick was figuring out what to do with those yarnovers. I like to tell my students that in brioche, every stitch gets a yarnover buddy, and no buddy gets left behind. This applies to the dropped stitches, too. It’s why my cutesy little rhyme works:

Over one,

Under two,

Grab the stitch,

Pull it through.

Over one, under two, grab the stitch, pull it through

How to pick up a dropped stitch in brioche:

First, put the dropped stitch onto a crochet hook. Then:

Over one (buddy) — Find the buddy that’s tight against the stitch under your crochet hook, and leave it alone. Let the crochet hook go OVER it without bothering it, and then go…

Under two buddies to find the next stitch. Sometimes the next stitch is already a bit closer, and if it is, that’s okay, grab it! But if it’s gotten completely out of place, and you’re not sure which buddies to tuck it behind before it can be pulled through the stitch on your hook, two is the magic number.

Once you’ve woven the crochet hook through the buddies in this order, Grab the dropped stitch.

Pull it through the stitch on the crochet hook. You’ll be threading back down behind the two buddies and in front of the one but leaving them alone otherwise. Don’t pull any buddies through the stitches.

By passing the crochet hook over the first buddy in your first step, you’re essentially leaving that buddy to hang out forever with the stitch below. Just make sure it is, in fact, only one buddy and not two mushed together and trying to trick you. Be bossy with those buddies and put them in their places so every stitch gets one buddy.

What do you think? Could you fix your brioche now? Let me know if you try this and how it works for you!

Here’s that video link again. Have you seen my YouTube channel yet?

 

Posted on

Making 2-Stitch Cables the Easy Way … And a New Hat Pattern: Merry!

Finally! The long-awaited cabled ear-flap hat is here!

But first, let me tell you my favourite way to make 2-stitch cables. Did you know that you don’t need a cable needle for these tiny things? And you don’t need to rearrange the stitches, either? There’s a fun little trick for making them. Here it is:

Right Cross 2-Stitch Cable

You’ll be working into the two stitches while they’re both still on the left-hand needle. So, insert your right needle into the second stitch (the further-from-the-tip one) knitwise from the front of the work. Knit it, but don’t slide it off the needle. Now, insert your right needle (with the new stitch still on it) into the first stitch on the left needle knitwise from the front. Knit it. Now both stitches have been knit, and you can slide both off the left needle, and you’re done!

Take care that you don’t loosen the stitches as you’re working them. What I do is knit the far stitch, insert my right needle into the next one, then give the working yarn a tug before knitting it.

Left Cross 2-Stitch Cable

Again, you’ll be working the two stitches that form the cable while they’re both on the left-hand needle. Insert your right needle tip into the second stitch, but this time, do it from the back of the work. You can do it through the back loop. (Even though this will twist the stitch, it doesn’t matter because it’ll be hidden.) Knit it, but don’t slip it off the left-hand needle. Now swing your right needle around to the front of the work and knit the first stitch normally and slide them both off the left needle. Done.

Don’t forget to give the working yarn a tug between knitting each stitch to tighten things up. Keep your motions small and work at the tips of your needles.

Now for the hat pattern: Merry!

Merry hat pattern. www.aknitica.com #knitting #cables Merry cabled hat pattern with pompoms. www.aknitica.com #knitting #cables #pompoms

 

If you’ve seen Merrick, then this one will look familiar. It’s a complete reworking of the pattern (even the charts are different) because it starts from the I-cord up. The I-cords grow into the ear flaps, and then the hat is cast on around the ear flaps and worked up to the crown.

It’s a fun, squishy knit that’ll keep your ears and cheeks cozy on cold winter days. It makes a great gift for kids, teenagers, skiers, snowshoers, skaters, outdoor dog walkers, snowman builders, and bus-waiting commuters. The cables give the hat a lot of stretch and squish, so the sizes are quite versatile. And if you’d like to make a more slouchy version, just knit a size up.

Like I do in most of my patterns, I’ve included tips for making everything just so. Never knit an I-cord before? Don’t worry, there are full instructions plus tips for making them even.

And don’t worry about remembering the instructions for the little 2-Stitch cables. I’ve included the relevant ones in the pattern.

[box type=”download” size=”large” border=”full” icon=”none”]You can grab the Merry pattern here.[/box]

Or on Ravelry here.

Posted on 2 Comments

Unusual Ways to Choose Colors for Your Knitting

Choosing colors for a project seems to be one of those things that makes us all second guess ourselves. So let’s go over some basic rules and guidelines that might help you to choose colors confidently.

1. Choose colors that you love. What makes your heart sing every time you look at it? Base your project on that.

2. Choose colors that you consistently wear. Have you ever said to yourself, “I wear blue all the time. I should branch out.” WHY? Why do you do that to yourself? Chances are that spending a month making yourself a pink sweater just because you “should” will end with a sweater that sits in your drawer instead of on your back. You know, deep down, that you won’t wear it. Don’t do it. Make yourself classics. If you’re going to branch out, spend $10 and 5 minutes at the mall to test a new color first.

3. Colors can really be combined in soooo many ways and still be pretty. I bet you’ll only think something is ugly if you incorporate a color that you just don’t like. If you don’t enjoy a color, leave it out.

4. If rainbows make you happy, make rainbows. A rainbow effect doesn’t have to mean you’re using all the bright colors in the exact rainbow order. Try using muted versions of the rainbow colors. Or switch the position of just two of them. Or add a bit of grey, brown, cream, or whatever your favorite neutral is to tone things down. If you like bright colors, do a bright rainbow. If you like soft, muted colors, use light colors with a hint of grey in them. If you like earthy tones, use brownish, toned-down versions of the rainbow colors.

5. Aim for balance. Balance just means that there’s a bit of proportion in your design. There are repeating motifs, whether in shape, texture, color, shade, darkness, lightness, brightness… Sometimes creating an imbalance can add visual interest. If you want to draw the eye to an area and really make it pop, use a color that isn’t everywhere else already. Think of sock cuffs in bright red, or just one stripe in a contrasting color. Balance and imbalance are both design tools to put in your tool box.

6. Use contrast. If you want to emphasize a motif, make it dark and your background light, or vice versa. They could both be colored, like yellow on blue. But if they’re both a medium shade, they’ll blend together. That could be a cool effect, but if you want your design to pop, try using a navy blue with a light yellow. If you use a dark yellow with a light blue, however, the yellow might not be dark enough to contrast well.

7. Try using three colors that touch each other in the rainbow or on the color wheel. Did you know that the color wheel is just a rainbow bent into a circle? Yup, it’s that simple. Three colors in a row will give you a nice, gentle effect. Think yellow-green, green, green-blue. Or yellow, green, blue. Or orange, orange-red, red. Have some fun with it.

8. Look around you for inspiration. Flowers, gardens, buildings, paintings, sunsets and sunrises, clouds, farmers’ fields at harvest time, the first rays of sunlight touching the frost on a window pane…. What are their main colors? Now look more closely. What tiny flashes of other colors are inside? If you find beauty in something, try using those same  colors in those proportions in your next colorwork project.

9. Beauty is subjective. Some things, like the golden spiral, are universally beautiful. Did you know that the proportions we consider to be beautiful are mathematical? Cool, eh? But color isn’t necessarily universally beautiful. I have a friend who exclaims in delight over any deep purple or harvest color. One of my sons thinks black and brown are the most lovely color combination. I, personally, will buy any electric-blue or turquoise yarn you put in front of me. If I tried to make myself buy the harvest colors, I’d undoubtedly be dissatisfied with them and my friend would think I was crazy. Such is life. So, buy the colors you like. They’ll match, I promise. Just remember to throw in some contrast in their shades (lightness and darkness) so the design doesn’t disappear.

10. The color wheel contains pairs of opposite colors. These pairs are called complementary colors. When you’re looking at a color wheel, they’re the ones directly across from each other. The main 3 pairs of complementary colors are blue & orange, red & green, and yellow & purple. When used together in a design, they create high contrast but also balance. Hm. I think I may have just learned something profound about life right there.

For more on color theory, check out this handy website.

In other fun color news, I’ve just finished this new hat pattern. I’ve named it Obla, and it’s a stranded colorwork hat made with just two colors. Interestingly enough, I chose two complementary colors for its prototype. And I used two shades, as well. The pinky-purple is medium-dark, and the seafoam green is nice and light. Simple color theory at work. 🙂 Oh, and of course, I actually quite like both those colors. Otherwise, what would be the point?

Obla Slouchy Hat pattern. www.aknitica.com #knitting #hats

 

It’s knit up using a total of 60 grams of fingering-weight yarn and size 3 US (3.25 mm) needles. About 30 grams for each of the colors should be enough. You can grab a copy of the pattern here on the aknitica website or over on Ravelry.

I really enjoyed knitting it up. The chart has a nice, simple repeat with no long floats anywhere. I wish I had more time to make another, maybe with a modified rainbow background and white for the contrast. Or maybe in dark charcoal grey with mustard yellow. What do you think?

Obla Slouchy Hat pattern. www.aknitica.com #knitting #hats

 

Obla Slouchy Hat pattern. www.aknitica.com #knittingtips #hats

 

I hope my color tips were a little helpful today. I figured that other places go into the technical details of color theory more, so maybe I should give you some other ideas. Can you think of any other tips for us? I’d love to hear from you. Leave a comment below, and don’t forget to share this post on Facebook or Pinterest if you found it helpful.

Just out of curiosity, what is your favorite color combination?

31 Days to Your Nicest Knitting series. www.aknitica.com #write31days #knittingtips

This post is part of my 31 Days to Your Nicest Knitting series. Every day, I’ll post a new tip or trick to make your knitting nicer. You can follow along easily by subscribing. If you have any knitting problems you’d like me to fix, let me know and I’ll try to answer your question as part of the series. You can find all the posts in the series here.

Posted on 1 Comment

Quick Tips for Knitting Fair Isle Colorwork

Fair Isle can be an intimidating technique, but it doesn’t have to be. Sometimes, all you need is a little encouragement and guidance to get you going. At least, that’s all I needed. A few years ago, I took a 3-hour class with Sally Melville, and my knitting life suddenly expanded.

Tips for knitting Fair Isle. www.aknitica.com #knittingtips #write31days

Tips for Knitting Fair Isle

1. Try holding your yarn in different ways until you find a way that feels comfortable to you. (Read: least awkward.) Then, keep plugging away at it until your fingers hit their rhythm and you gradually speed up.

2. Some ways to hold your yarn:

  • with one color in each hand, knitting continental on one side and English on the other. (ie, alternating picking and throwing.)
  • with both colors in one hand: You can hold them together like a ribbon, side by side on your finger. You can have one strand wrap under your finger and the other over your finger. You can have one strand on your index and one on your middle finger. You could keep them on the same finger but separate them with a ring or a hair elastic.

3. Whatever way you hold your yarns, always keep them in the same positions in relation to one another. For example, if I hold my foreground color in my left hand, I keep it there for the entire project. I usually need to write it down because when I set it down for a while, I forget.

4. The color you hold underneath will be the more prominent color. The strand that runs overtop of the other will recede slightly. This is why, if you switch hands or yarn positions halfway through a project, it will look like your design has changed. So, whatever color you want to pop out, hold it in the bottom position. (In my case, that’s my left hand.) Actually, whatever way you hold the yarn, the strand that’s held to the left will be the bottom, popping-out one.

5. To prevent bunching of stitches between color changes: Every time you switch colors, spread out the knitting on the right-hand needle, then start with the next color. Actually, keep spreading out your knitting as you go. I think Sally recommended doing it every 3 stitches or so.

6. Your colorwork might look uneven at first, even if your tension was pretty good. Washing and blocking it will help.

7. Fair Isle gauge won’t be the same as your plain knitting gauge, even if you’re using the same yarn and needles. The floats tend to pull the fabric a bit tighter, making the stitches more like squares than little short rectangles. You must measure your gauge over a colorwork swatch, preferably in the same pattern as your project.

8. If your color changes happen further than an inch apart, you might want to “catch” the strand of the dormant color halfway across the gap to keep a long strand (float) from forming. This just means that you’ll bring the floating yarn in front of the working yarn (but not the knitting needle) before knitting one stitch. Then, you’ll return it to its original position and keep knitting.

9. Wool is more forgiving and is the best fiber for Fair Isle.

Sources: Mastering Color Knitting by Melissa Leapman and Two Hands, Two Colours Class by Sally Melville.

31 Days to Your Nicest Knitting series. www.aknitica.com #write31days #knittingtips

This post is part of my 31 Days to Your Nicest Knitting series. Every day, I’ll post a new tip or trick to make your knitting nicer. You can follow along easily by subscribing. If you have any knitting problems you’d like me to fix, let me know and I’ll try to answer your question as part of the series. You can find all the posts in the series here.

Posted on

How to Measure Knitting

Many patterns will tell you to “work in pattern for ____ inches / cm.” So measuring your knitting is an often-used, important skill. Here are some tips for getting accurate measurements.

The standard for how to measure knitting is different from the “counting your rows” standard. When we’re counting the number of rows we’ve worked, we do not include the cast-on edge or the stitches on the needles.

But, when measuring, we want to include the entire length of fabric. So we include the cast-on edge and even the unfinished stitches on the needles.

Lay your knitting on a flat surface. Arrange it and its needles so it’s neither stretched out nor scrunched up.

To measure length in knitting

Grab a straight ruler and line it up so the zero line is at the bottom edge, just as if you were about to measure a piece of paper or a desk. (A fabric ruler will work fine, but they’re less reliable in this instance because they can become distorted over time and because they don’t lay flat. If you use it, stretch it out taut to measure, but don’t pull too hard or you’ll stretch it permanently.)

Lay the ruler on top of the knitting away from the edges or any other distortions in the fabric.

Measure from the bottom up to the tops of the stitches on your needles.

To measure width in knitting

Arrange the ruler so the zero line is touching the outside edge. Lay it across the middle of the fabric, away from the cast-on or the needles. You’re looking for a place where the fabric is the least distorted. This is where a straight ruler comes in handy. You can use it to gently press the edges down if they’re inclined to curl. Measure across to the opposite edge.

To measure from the last decrease or increase

This is what you do when, for instance, you’ve finished a sweater’s waist shaping, and now you need to knit ___ inches further before the arm hole shaping. Or when you need to measure from the arm hole shaping up to the start of the shoulder shaping.

Find the landmark in your pattern. It’s a good idea to mark decrease or increase rows in some way when you make them so you don’t have to search hard for them later. Use a piece of contrasting-colour waste yarn, a safety pin, a stitch marker, or even one of those cheap, plastic hair elastics. You can put it directly into the stitch or between stitches, as long as it stays in the same row as you continue knitting. If you’ve used a cheap hair elastic, you can just cut it out later. (Thanks to my friend Laurie for that tip.)

Now that you know where your landmark is, measure from its row’s top edge up to the top of your stitches on the needles.

If you’re looking for info on how to measure gauge, not length or width, check out this previous post in the series.

31 Days to Your Nicest Knitting series. www.aknitica.com #write31days #knittingtips

This post is part of my 31 Days to Your Nicest Knitting series. Every day, I’ll post a new tip or trick to make your knitting nicer. You can follow along easily by subscribing. If you have any knitting problems you’d like me to fix, let me know and I’ll try to answer your question as part of the series. You can find all the posts in the series here.

Posted on

How to Avoid Repetitive Stress While Knitting

At some point, most knitters deal with repetitive stress or carpal tunnel problems, whether mild or severe. Here are some tips that might help to keep your hands and wrists in good knitting condition for many years to come:

Take breaks. When you do, get up, walk around, and stretch out your arms. Reach them up over your head. Loosen up your shoulder and neck muscles.

Stretch. Bend your wrists backwards and gently stretch your muscles. When you stretch, don’t pull many little times and bounce your muscles, but apply constant, steady, gentle pressure for about 10 – 15 seconds at a time.

Listen to your body. When your hands and wrists are aching or starting to ache, stop. Stretch. If you feel shooting pain, you’ve gone too far. Give them a rest until you can resume without pain.

Think in the long term. It’s better to stop before you hurt yourself so you can enjoy many years of knitting.

Repetitive stress is caused by doing the same motion over and over again. So switch motions. Try knitting in another style, like Continental, English, the pencil hold, or Peruvian purling. If you’ve been knitting flat, switch to a project in the round. If you’ve been knitting with worsted weight and relatively big needles, switch to a small-gauge project, like socks or gloves for a while. Switch from a cabled project to some colourwork. That way, you don’t have to stop knitting altogether when your hands get tired. This is what I do, and so far, it works. Because let’s face it, it’s not fun when you have to stop knitting.

Try using different needles. A different size, a different style (straights instead of circulars, perhaps), or even try a different substance, like bamboo or metal. There are even needles that claim to be ergonomically better for your hands, like the square, four-sided needles made by Kollage. (I just bought one in a 32″ circular. I’m going to try it out, just because trying new things is fun. The back of the package is fascinating. It says “The square needles are perfect for knitters who have arthritis, carpal tunnel, or stiffness in their hands and fingers.”  I hope to try them tonight.)

There are other products out there to help, like wrist braces that fit like small bracelets and don’t impede your motion. A friend of mine uses them and says they do help.

Keep your hands warm. Protect them from muscle stiffness. Hey, I happen to have a pattern to help with that!

Scrunchy Ombre Arm Warmers #knitting #stashbusters www.aknitica.com

If you’re a tight knitter, Stop It! Try to relax while you’re knitting. Be conscious about how you’re holding your needles and yarn, and if you notice yourself tensing up, make a point of relaxing your shoulders, arms, fingers, hands. If you’re worried about your knitting tension changing, try using a bigger needle size to make up for your new relaxation. An added bonus of relaxing your tension is that it will make your stitches much easier to work with and to slide along your needles.

Sit up straight. Apparently, when you slouch your shoulders forward, it compressed nerves in your neck. This, in turn, affects your arms, wrists, and hands.

What do you think? Have you tried any of these things? Did they work for you? If you have any extra tips to help other knitters, please leave them in the comments. 

31 Days to Your Nicest Knitting series. www.aknitica.com #write31days #knittingtips

This post is part of my 31 Days to Your Nicest Knitting series. Every day, I’ll post a new tip or trick to make your knitting nicer. You can follow along easily by subscribing. If you have any knitting problems you’d like me to fix, let me know and I’ll try to answer your question as part of the series. You can find all the posts in the series here.

Posted on 2 Comments

The Most Important Thing You Can Do To Improve Your Knitting

Hello, my knitting friends! We’re just over halfway through October’s series, and I have something important to tell you. It’s maybe one of the most important knitting tips I can ever share, and it needs to be said.

It will definitely improve your knitting because it will give you the confidence to seek out new skills, to try new things, to achieve more than you dreamed possible. It has worked for me, and it will work for you.

I’ve spent time with lots of knitters and, well, lots of people. And you know what we all do to ourselves that makes everything so much more difficult? Myself included?

We tell ourselves it’s too hard. We’re not very good. We need our hands held. We’re not as fast as so-and-so. We’ll never be that proficient.

What the heck are we doing to ourselves? We’d never put our friends down like that. We tell them nice things, and we encourage them. (I hope.)

So, today’s tip is this: be kind to yourself.

I love reading books about neuroscience and how our brains work. I have depression, and I’ve been on a constant hunt for the last 14 years for any and all information on how my brain works and how I can fix it. And you know what? I’ve found LOTS of good stuff. So many small things that have added up to me living a practically-normal, depression-free life. The most I get now is the winter blahs, and that’s because I keep forgetting to take my vitamin D.

One of the main, most helpful things I’ve learned applies to every area of life, whether it’s depression or knitting. It’s the neuroscientific (is that a word?) principle of “use it or lose it.” Did you know that our brains are constantly restructuring themselves? It’s called neuroplasticity. The more we think something, the more the neurons in that thought pathway light up, and a stronger, faster connection is formed. If impulses and chemicals keep going down that pathway, it becomes a superhighway in your brain. It becomes the default setting, if you will.

If your default setting is negativity, then your thoughts will more quickly go down that path without your even thinking about it. And, of course, our actions and outcomes follow directly behind our thoughts. And our emotions trail behind.

Are you feeling discouraged? What are you thinking about? I bet it’s pretty gloomy.

When I started examining my thoughts, I realized, My goodness! No wonder I feel so terrible!

The good news is that we can retrain our brains. We can decide to stop using those negative superhighways, and eventually, because of the use-it-or-lose-it principle, they’ll fade away. Isn’t that amazingly good news?

Next time you’re feeling discouraged about your knitting, stop and notice your thoughts. Would you say those things to your best friend? Your child? Your mate? Your boss? Then why are you saying them to yourself?

Now that you’ve noticed your thoughts, consciously replace them with something positive.

You can do this.

You can knit anything.

This mistake isn’t such a big deal. If it’s not on fire, it’s fixable.

Every time your thoughts start going down that spiral, notice them. Stop them. Change them. After a while, with some practice, you’ll build new pathways in your brain. Your superhighways will be made by you, as a conscious decision, and they will be beautiful.

It will take time and practice, so the first rule of reprogramming your brain is to give yourself grace. What’s grace? It’s unmerited favor. It’s unlimited chances without recriminations. It’s allowing yourself to start over right that minute, without bringing the baggage of past mistakes forward.

One sweater disaster does not equal a failure at future sweaters. It means one sweater’s worth of yarn that you can make into something beautiful.

Go make something beautiful today. You’re worth it.

Yes, you.

p.s. Neuroplasticity and visualization can also help you knit faster. Cool, right?

31 Days to Your Nicest Knitting series. www.aknitica.com #write31days #knittingtips

This post is part of my 31 Days to Your Nicest Knitting series. Every day, I’ll post a new tip or trick to make your knitting nicer. You can follow along easily by subscribing. If you have any knitting problems you’d like me to fix, let me know and I’ll try to answer your question as part of the series. You can find all the posts in the series here.

Posted on 2 Comments

How to Count Rows in Knitting

Have you ever lost track of how many rows you’ve knit? Wouldn’t it be nice if you could just look at your knitting to find out?

Well, you can. Yay! And I’m going to show you how to count rows in knitting right now.

Most of us, at some point, get confused by where we begin and end our counting. Do the stitches on the needles count as a row? When a pattern tells us to increase every 4th row, does that mean we knit four rows, then increase, or do we knit three rows, then increase? And what does that look like in the knitting?

Basic rules for counting rows in knitting

Don’t include the cast-on edge in your counting.

Don’t include the stitches on the needles in your counting.

Count rows by counting all the V’s (knit stitches) stacked in one column. If you have a column of five V’s, that means you’ve completed five rows in your pattern. You’re about to work the sixth row.

If you get confused by the stitches on the needles, think of them like this: They’re incomplete. They’re waiting in the wings, ready to perform. They’re on deck, but not yet in play. That’s why you don’t count them.

Examples

Let’s say you’re cabling every 8th row. What this looks like in your knitting is that you have a column of 7 V’s completed. The 8th row is on the needles, waiting to be worked, but not yet counted. As you begin to cable, you’ll notice that it’s those on-deck stitches that are getting crossed, and you’re knitting into them. When the row is finished, you’ll have 8 V’s in your knitting, but they’ll be hard to see because they’ll be crossed now. The stitches that are now on your needles will become row 1 in the next cable repeat, but you haven’t knit them yet so they’re not counted.

Let’s say you’re decreasing every 4th row. You’ve already made a couple decrease repeats, and you’ve lost count. Look at your work. Find the last decrease you made. It will look like two stitches that are separate at the bottom but are overlapped and have only one stitch growing out of their tops.

Count the first stitch growing out of the tops as your first row. Including it, how many V’s are completed under your needles? Two full V’s mean you’ve knit 2 rows. Oops, that’s not enough! What you’re looking for is 3 full V’s worked, and your 4th row on the needles, ready to be decreased but not yet in play.

Let’s say you’re M1 increasing every 3rd round. Increases are interesting to count because they’re generally worked into the round or row below. You reach into the row below and pick up the running stitch, then knit into it twisted. So what that looks like when you’re counting from M1 increases is a tiny loop appearing in the middle of two normal stitches, with a normal-sized stitch growing out of it. When counting, don’t count the tiny loop. Start counting your rounds at the first normal-sized stitch or V. When increasing every 3rd round, then, you’re looking for the tiny loop as your landmark, and then there should be 2 normal V’s stacked above it and the third round on the needles, waiting to be worked. Now you can increase your third round.

When counting above a yarnover increase, first find the hole as your landmark. Look at it closely. There will be a kind of spread-out, horizontal strand of yarn forming the top of the hole, with a more normal-looking stitch growing out of it. That spread-out strand is the yarnover. Don’t count it. Start counting at the stitch that grows out of it. Count those V’s up the column as normal, ignoring the stitches on your needle. If you’re yarnover increasing every 5th round, there should be 4 V’s in the column. Then, you’re ready to work the next increase round.

Similarly, when you’re counting above a Lifted Increase (AKA LRinc or LLinc), you don’t count the weird stitch itself, but the first normal V that grows out of it as your first row. Take a close look at the increase. It looks like two stitches that grow out of the same base. It’s a two-headed V. 😉 Don’t count the two-headed part. Count the first stitch that comes out of the leaning-over head. Then keep counting up the column to see how many rows are under the needles.

Counting purl rows

If, for some reason, you need to count your rows in purl instead of in a knit column, look for the frowns. As I mentioned in The Anatomy of a Knit Stitch, stitches on the purl side look like smiles and frowns. The smiles are the running stitches, the “feet” that connect one stitch to another in a row. They’re the in-between part. The frowns (the downward-curving bumps or lines) are the tops of each stitch.

Find a column of frowns and count each frown. If there are 6 frowns stacked above each other, you’ve complete six purl rows.

Counting garter stitch rows

Garter stitch (where every row is knit) is funny to count because the tops of the stitches are harder to find. The V’s get smooshed behind the frowns and disappear. Most of us count garter stitch by ridges. A ridge is simply a complete set of two rows: one row of V’s and one row of frowns.

When you begin your garter stitch, place a marker at the beginning of your row or round. Now, you have a landmark by which to measure your progress. If the first row of your garter stitch is a knit row, which is normal, then from the right side, a complete ridge will look like a flat line of V’s hidden under the next row of frowns/smiles. Those two rows make one garter ridge.

When you’re working flat (in rows): If, from the right side, you see that your needle tip is at the left of your work and there are V’s directly under your needle, you’ll know that you’ve only worked half a ridge, or an uneven number of rows.

If you’re working garter stitch in the round: a purl ridge directly under the needles means one ridge set is completed. A line of flat, knit V’s directly under the needles means only half a ridge set is completed.

31 Days to Your Nicest Knitting series. www.aknitica.com #write31days #knittingtips

This post is part of my 31 Days to Your Nicest Knitting series. Every day, I’ll post a new tip or trick to make your knitting nicer. You can follow along easily by subscribing. If you have any knitting problems you’d like me to fix, let me know and I’ll try to answer your question as part of the series. You can find all the posts in the series here.

Posted on

How to Pick Up Dropped Stitches, Even from the Cast On Edge

I first knew that I could knit anything when I learned that I could fix anything.

My fear of making mistakes, trying a new project and getting stuck, and ruining hours of knitting went away.

The first step towards knitting confidence, then, seems to be learning how to fix mistakes in knitting. Here’s how to fix a dropped stitch.

If you don’t currently have a crochet hook in your knitting kit, it’s time to put one in there. (And if you don’t have a knitting kit, it’s time to put one together. Make it small and portable. I throw mine in my knitting bag every time I leave the house… or even change rooms.)

To pick up a dropped stitch, insert your crochet hook into the loop on the knit side. If just one stitch dropped, then just put it back onto your left-hand needle with its right side in front.

If a column of stitches dropped, it will look like a little loop (the dropped stitch) with a ladder of any number of horizontal lines of dropped stitches above it. Put the crochet hook into the loop to catch it. Then, lay your knitting on a flat surface (a table, your knee, a book) and smooth out the ladder of dropped, horizontal stitches. You want to make sure they’re not all jumbled together so you can see that they’re in the right order. If in doubt, check their sides, where they’re still connected to the columns of stitches beside them. Smooth them into their proper order in the ladder as best you can.

To pick up a dropped knit stitch

Now, with your crochet hook, reach through the front of the last proper stitch and grab the first (nearest, bottom) strand in the ladder. Pull it through the stitch. One stitch has been remade! Keep on reaching through and pulling each consecutive strand through each loop. When you get to the top, put the last stitch back on the left needle, ready for knitting. (Or purling, as the case may be.)

To pick up a dropped purl stitch, I find it easiest to turn the work so I’m looking at the other side, where it’s a knit stitch. Then just pick it up as you would a knit stitch: insert the crochet hook into the stitch from the front, grab the nearest running stitch in the ladder, and pull it through the stitch. But put the remade stitch onto the right-hand needle… because when you turn your work back around to the proper side, that will be the left-hand needle, and the stitch will be ready to be worked.

To pick up a dropped column in garter stitch, you may want to keep flipping the knitting over so you can pick each stitch up as a knit stitch. Remember, knit stitches look like V’s and purl stitches look like bumps or frown lines. You’ll be picking up a knit stitch over a purl bump, then flipping the work to the other side and picking up another knit stitch over a purl bump. Back and forth, until you’ve reached the top. Be extra careful picking up garter stitch because the strands in the dropped ladder like to fool you into picking them up in the wrong order.

Now, what if you’ve dropped stitches all the way down to the cast-on edge? And all you have is a ladder of straight running stitches and no loop with which to start? Well, you’re going to create that loop. That’s all a cast on is, after all, in its most basic form: a series of loops that have had stitches pulled through them.

So, to pick up a dropped cast on edge, lay your work down and spread out the dropped stitches so you can smooth the ladders and get them in order. Find the very bottom strand in the ladder. This is the strand you’re going to twist into a loop. Look at your cast on edge around it, the edge that hasn’t been messed up. If you used a long-tail cast on or variation of it, it will look like little lines slanting slightly up and to the right. If it looks like purl bumps in front of lines, you’re looking at the back side and you need to flip your knitting over so the other side is facing you.

With the cast-on edge of your work pointed towards you:

Insert your crochet hook perpendicular to your body and the cast-on edge, with the hook pointing towards you, between the first and second strands in the ladder, towards the first strand. Grab the first strand under the hook, then rotate the hook counterclockwise until the hook is pointing away from you. This will have created a twist in the strand. You now have a loop! Keep it on the crochet hook, and now you can grab the next strand in the ladder of dropped stitches and pull it through the loop you created. Continue up the ladder as you would for normal dropped stitches until you’ve gotten them all.

I know that’s a mouthful of words to describe a really simple maneuver, so here’s a quick video of questionable quality, taken by my oldest, to illustrate:

What do you think? Does this help you pick up dropped stitches? Let me know in the comments.

31 Days to Your Nicest Knitting series. www.aknitica.com #write31days #knittingtips

This post is part of my 31 Days to Your Nicest Knitting series. Every day, I’ll post a new tip or trick to make your knitting nicer. You can follow along easily by subscribing. If you have any knitting problems you’d like me to fix, let me know and I’ll try to answer your question as part of the series. You can find all the posts in the series here.

Posted on 3 Comments

How To Cable Without A Cable Needle

Confession: I find cabling to be a little tedious. Using a cable needle and transferring stitches back and forth breaks my flow, and it annoys me. I knit cables sparingly.

Until, that is, I discovered how to cable without a cable needle. Now, I don’t mind cabling so much. In fact, it’s kind of fun.

I know of two ways to cable without a cable needle. One way, I learned from Grumperina’s website, here. But after trying it, I found that I didn’t love it as much as the straight rearranging-stitches method that I’m about to show you. But one of the joys of knitting is that you can try a couple methods and then settle on your very own favourite. In fact, I encourage it. Try everything!

Basic Construction of a Cable

A cable is made of a column of knit stitches, usually flanked by columns of purl stitches. The column is generally, but not always, divided in half. The direction the cable leans is determined by which half of the stitches in the column crosses in front of the other half.

If the left half crosses in front, the cable leans over to the right.

If the right half crosses in front, the cable leans over to the left.

Right-Cross Cable without a cable needle

To get a cable to lean to the right, you’ll want the left half of the stitch column to come across the front. So, with your right-hand needle, reach in front of the right half and insert the needle tip into the stitches that form the left half of the cable. In this case, I have a 6-stitch cable, with 3 stitches in the left half and 3 stitches in the right half. A written direction for this cable might read either C6R (cable 6 right) or 3/3 RC (3 over 3 right cross).

Right cross cable step 1. Cabling with a cable needle. www.aknitica.com #knittingtips #write31days

With your right hand, pinch the stitches under the cable. With a smooth, straight movement, withdraw the left needle from all the stitches in the cable.

Cable right cross step 2. Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

The right needle will be holding on to the left half, and the right half of the column will be free at the back, but pinched and held in place by your right hand underneath. With the same smooth, straight movement at the back, poke the left needle back into those stitches immediately.

Right cross cable step 3. Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

Slip the stitches on the right-hand needle back to the left needle…

Right cable cross step 4. Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

…then knit across all the stitches.

Right cross cable step 5. Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

Right Cross Cable: Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

Tips:

While you’re performing these movements, keep the needle positions the same except for the straight, out-and-in motion of the left needle. Don’t move or spread the needles and stitches in any way. Keep the movement small and quick.

A slippery needle works best for this maneuver. I use Knit Picks Nickel-Plated needle tips. Metal Addis or Hiya Hiyas are also perfect. Anything slightly sticky, like bamboo, laminated wood, or plastic might add just enough friction to tug the stitches and frustrate you.

Left-Cross Cable without a cable needle

To form a left-leaning cross, the right half of the cable column needs to go in front, and the left half needs to cross behind. So, with your right-hand needle, reach behind the right half and insert the needle tip into the stitches that form the left half of the cable.

Left cross cable step 1. Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

With your right hand, pinch the stitches under the right half of the cable. With a smooth, straight movement, withdraw the left needle from all the stitches in the cable.

left cross cable step 2. Cabling without a cable neede. www.aknitica.com #knittingtips #write31days

The right needle will be holding on to the left half, and the right half of the column will be free at the front, but pinched and held in place by your right hand underneath. With the same smooth, straight movement at the front, poke the left needle back into those live stitches immediately.

left cross cable step 3. Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

Slip the stitches on the right-hand needle back to the left needle…

left cross cable step 4. Cabling without a cable needle. www.aknitica.come #knittingtips #write31days

…then knit across all the stitches.

left cross cable step 5. Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

left cross cable. Cabling without a cable needle. www.aknitica.com #knittingtips #write31days

 

It is completely normal to be nervous about this technique. Most of us freak out a little when we pull our needles out of our stitches. Needles usually fall out against our will, so we try to avoid it at all costs. But it doesn’t have to be something you’re afraid of. Tomorrow, I’ll show you how to easily pick up dropped stitches, even if they’ve dropped all the way down to your cast on edge.

But in the meantime, don’t worry. Practice this on a worsted-weight project with real wool so it’s nice and sticky and doesn’t want to unravel. It might feel awkward the first couple times, but, before you know it, your hands will get the knack of it and your cabling rhythm will improve and get faster.

31 Days to Your Nicest Knitting series. www.aknitica.com #write31days #knittingtips

This post is part of my 31 Days to Your Nicest Knitting series. Every day, I’ll post a new tip or trick to make your knitting nicer. You can follow along easily by subscribing. If you have any knitting problems you’d like me to fix, let me know and I’ll try to answer your question as part of the series. You can find all the posts in the series here.